9. If your cabinets end up butting against another wall, you may need a filler strip to make up the last few inches. If you have custom cabinets, they should have been built to fill this gap, but if you are using stock or RTA Kitchen Cabinets the filler strip may be needed. If you do need to use a filler strip, leave the last cabinet detached from the other cabinets. Clamp a straightedge to the face of the nearest installed unit, extending far enough for you to put alignment marks on the end wall. Allow a 3/4" offset behind those marks (for the thickness of the filler piece) and fasten a cleat to the wall. Then install and fasten the last cabinet and measure the gap between its face frame and the wall.
Have you been shopping for kitchen cabinetry and been dissatisfied with the selection of the big box stores and import cabinet dealers? Well perhaps you should really take a close look at considering custom built kitchen cabinets as an option for your kitchen remodel project. Here I will discuss some of the advantages and disadvantages of both stock and custom cabinetry.
In this case we bought (RTA) Ready-To-Assemble Kitchen Cabinets from RTA Kitchen & Bathroom Cabinet Store. Now the kitchen cabinets are assembled, we are ready to start marking out our layout lines. Some people start with the base cabinets, but we are going to start with the wall cabinets first. There is no right or wrong way to start, I just prefer to start with the upper cabinets first.
Kitchen Design Saturday , April 21st , 2018 - 01:47:01 AM
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does homebusinessguide.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.