As I mentioned above, you have the option of using a piece of 1' x 3' lumber for the installation or building a frame to support the cabinets (I have included a picture of a sample frame below). This can be made out of 2' x 4's and should be tall enough to support the bottom of your wall cabinets. If you plan on installing more than one kitchen, then I would suggest the frame, but a piece of lumber will do just fine if this is a one time event. In either case, you will need another set of hands to help with the installation.
3. Use a stud finder to locate the wall studs. Use a pencil to mark the stud locations at least 6 inches above and below the line for the bottom of the wall cabinets. Draw straight vertical lines between the top and bottom marks to indicate the center of the studs.
Most people want to know how much more custom cabinetry will cost as compared to stock cabinets. This is almost impossible to answer with any degree of accuracy. The real truth of the matter is that custom cabinets are going to cost more that the lower lines of comparable stock cabinetry. But we have seen custom cabinets be very competitive with the mid to higher range stock cabinets. Despite the higher prices of custom kitchen cabinets it is almost always worth the extra cost. The cabinets are built in a much more solid fashion as well as most custom cabinetmakers will use a ¾ inch thick cabinet case material, it doesn't get much more solid than that. All cabinet shops will have varying prices, so we do recommend you always compare the same exact kitchen design from shop to shop for the most accurate estimations.
Kitchen Design Monday , May 14th , 2018 - 01:43:49 AM
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does homebusinessguide.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.